NewAir AI-215SS Owner's Manual page 13

3. After the desired time is set, the display will show the time remaining and
will decrease in 0.1-hour increments. When the timer reaches ZERO and
disappears, the unit will start to run automatically according to your
settings.
To cancel when the time is set but not yet running, press the TIMER button
twice to cancel it.
How to Set the OFF-TIMER Program
When the unit is on, program the OFF-TIMER to stop the unit after a set time.
1. Press the TIMER button on the control panel. "1.0H" will flash in the Timer
Set Display Window.
2. Press the SELECT button to set the Timer delay to a time between 1.0 and
18.0 hours, in half hour increments.
3. After the desired time is set, the display will show the time remaining and
will decrease in 0.1-hour increments. When the timer reaches ZERO and
disappears, the unit will stop running automatically.
To cancel while the unit is running, press the TIMER button twice to cancel the
TIMER-OFF setting.
www.newair.com
EN
13