Table of Contents
Advertisement
Quick Links
GUILD
1500W Router
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild router
These instructions contain important information that will help you get the best from your Guild
router, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help
guildpowertools.co.uk
@
PRT150G
Advertisement
Table of Contents
Related Manuals for Guild PRT150G
Summary of Contents for Guild PRT150G
- Page 1 Important - Please read these instructions fully before operating or maintaining your Guild router These instructions contain important information that will help you get the best from your Guild router, ensuring it remains safe to operate. If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989...
-
Page 2: Table Of Contents
Contents Safety Information.....................3 In The Box........................6 Accessories........................6 Operating Instructions....................8 Maintenance......................15 Technical Data......................15 Environmental Protection..................16 Guarantee........................17 Declaration of Conformity..................17 Plug Replacement(UK & Ireland Only)..............18 Customer Helpline 0333 3201989... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the router. To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection Wear eye protection... - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
-
Page 6: In The Box
In The Box Parts Fine-Adjustment Knob for Depth-Of-Cut Left Handle Scale for Fine Adjustment of Depth-Of-Cut Clamping Lever Right Handle (With On/Off Switch) Dust Adapter Lock-off button On/Off Switch Index Mark Variable speed control thumb wheel Wing Screw For Depth Stop Tightening Nut With Collet Depth Stop Router bits... - Page 7 In The Box Parts Customer Helpline 0333 3201989...
-
Page 8: Operating Instructions
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for routing grooves, edges, profiles and elongated holes as well as for copy routing in wood, plastic and light building materials, while resting firmly on the workpiece. 1. - Page 9 Operating Instructions 2. MOUNTING THE EXTRACTION ADAPTER (SEE FIG C) To connect the vacuum cleaner via a suction hose, you can fasten dust adapter (17) to base plate (9) directly. WARNING: When mounting the extraction adapter, ensure correct mounting position! •...
- Page 10 Operating Instructions Speed Pre-selection The required speed can be pre-selected with the thumb-wheel (19) (also whilst running). 1 – 2 = low speed 3 – 4 = medium speed 5 – 6 = high speed The required speed is dependent on the material and can be determined by practical testing.
- Page 11 Operating Instructions Coarse Adjustment of the Depth-of-cut Place the router on the work-piece to be tool. Set the fine adjustment for depth-of-cut in the centre position with fine-adjustment knob (1); to do this, turn the fine-adjustment knob until the markings (23) on the backside of the router are in alignment, as shown.
- Page 12 Operating Instructions 5. USAGE OF THE STEP BUFFER a) Dividing the cutting procedure in several steps For deep cuts, it is recommended to carry out several cuts, each with less material removal. By using the step buffer, the cutting process can be divided into several steps. Set the required depth-of-cut with the lowest step of the step buffer.
- Page 13 Operating Instructions 8. ROUTING WITH GUIDE BUSHING (SEE FIG G) WARNING: Choose a router bit with a smaller diameter than the inner diameter of the guide bushing. The guide bushing (24) enables template and pattern routing on work-pieces. Place the guide bushing over the hole in the centre of the base plate, and align the two through holes in the bottom of the base plate with the countersunk holes in the guide bushing.
- Page 14 Operating Instructions 10. ROUTING WITH PARALLEL GUIDE (SEE FIG H, I) Slide the parallel guide (25) with the guide rods (26) into the base plate (9) and tighten at the required measure with the locking screw (11). Guide the tool with uniform feed and sideward pressure on the parallel guide along the edge of the workpiece.
-
Page 15: Maintenance
Maintenance Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. -
Page 16: Environmental Protection
Technical Data Vibration Information Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value: a = 2.44m/s² Typical weighted vibration Uncertainty K = 1.5m/s² The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. -
Page 17: Guarantee
Your statutory rights remain unaffected. Issue1 08/2015 Declaration of Conformity This Guild 1500W Router model number PRT150G fully complies with the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/EC(before 2016/04/20) and 2014/30/EC(since 2016/04/20), RoHS Directive 2011/65/EU and the following harmonized EU standards... -
Page 18: Plug Replacement(Uk & Ireland Only)
Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.