Table of Contents
Advertisement
GUILD
900W Planer
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild planer
These instructions contain important information that will help you get the best from your Guild
planer, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
PPL900GH
Advertisement
Table of Contents
Related Manuals for Guild PPL900GH
Summary of Contents for Guild PPL900GH
- Page 1 Important - Please read these instructions fully before operating or maintaining your Guild planer These instructions contain important information that will help you get the best from your Guild planer, ensuring it remains safe to operate. If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989...
-
Page 2: Table Of Contents
Contents Safety Information.....................3 In The Box........................7 Accessories........................7 Operating Instructions.....................10 Maintenance......................15 Technical Data......................15 Environmental Protection..................16 Guarantee........................17 Declaration of Conformity..................17 Plug Replacement (Uk & Ireland Only) ..............18 Customer Helpline 0333 3201989... -
Page 3: Safety Information
Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the guild planer. To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection... - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
- Page 6 Safety Information Important - Please read these instructions fully before starting assembly Planer Safety Warnings 1. Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface leading to possible loss of control and serious injury. Note The above warning applies only to planers without an automatic closing guard.
-
Page 7: In The Box
In The Box Parts Rebate guide fastening screw（2pcs） On/off switch Cutting depth scale Lock-off switch Cutting depth adjustment knob Hand grip areas Dust bag (SEE FIG I) Dust extraction cover Blade (SEE FIG J) Belt cover Blade clamp (SEE FIG J) Fastening screw Spanner (SEE FIG J) Parallel guide... - Page 8 Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use The tool is intended for planing of firmly supported wooden materials, such as beams and boards. It is also suitable for beveling edges and rebating. 1. SAFETY ON/OFF SWITCH (SEE FIG A) The switch is locked off to prevent accidental starting.
- Page 9 Operating Instructions 3. STANDARD SURFACE PLANING (SEE FIG C) Set the desired cutting depth. Position the front part of the base plate flat onto the work surface. Make sure that the blades are not touching the workpiece. Switch the tool on and push your planer forward and it will start cutting. Always maintain all of the base plate flat on the work surface to prevent the cutting blade jumping.
-
Page 10: Operating Instructions
Operating Instructions 5. USING THE PARALLEL GUIDE (SEE FIG F) Insert the screw provided through the hole on the support of parallel guide (7). Turn the screw into the nut on the housing. Fix the parallel guide on the support of parallel guide with the screw and nut. - Page 11 Operating Instructions Operating Instructions 8. USING THE DUST BAG (SEE FIG I) Your planer is equipped with a dust bag for collection of wood chips in the work area. Make sure the zipper on the bag is fully closed. To fit the dust bag, simply insert the tube end of the bag into the dust extraction outlet.
- Page 12 Operating Instructions 9. BLADE FITTING AND CHANGING (SEE FIG J, K, L, M) NOTE: Dull and worn blade cannot be reground and must be replaced. Always replace blades in pairs. WARNING: Remove power cord from the socket before carrying out any adjustments or changing blades.
- Page 13 Operating Instructions Before reinserting a new or reverse blade, always clean both the blade and the blade seat if dirty. Slide the blade into the clamp with a spanner (or a screwdriver) in the correct orientation. Check the blade is equal with the clamp. Retighten the three blade screws with the spanner.
- Page 14 Operating Instructions 11. BASEPLATE STAND (SEE FIG P, Q) Uplift the rear of the planer, the base plate stand knob (20) can make the tool to be set down directly and protect the cutting blades from any damage and the blades from damaging the surface (SEE FIG P).
-
Page 15: Maintenance
Maintenance Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. -
Page 16: Environmental Protection
Technical Data Vibration Information Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a = 4.789m/s Uncertainty K = 1.5m/s² The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. -
Page 17: Guarantee
Your statutory rights remain unaffected. Issue1 08/2015 Declaration of Conformity This Guild 900W Planer model number PPL900GH fully complies with the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/EC(before 2016/04/20) and 2014/30/EC(since 2016/04/20), RoHS Directive 2011/65/EU and the following harmonized EU standards... -
Page 18: Plug Replacement (Uk & Ireland Only)
Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.