Gemini MDJ-1000V2 User Manual page 4

C L E A N I N G T H E
U N I T
To clean the MDJ-1000V2, use only a dry soft cloth and/or
compressed air. If the unit is soiled with stubborn dirt, we suggest
using a 2:1 solution of distilled water and 30% isopropyl alcohol.
Avoid using harsh cleaning chemicals such as benzene, paint
thinner, bleach, or hydrochloric acid, which will damage the unit
O P E R AT I N G
C O N D I T I O N S
For optimum performance, the temperature of the operating
environment should be between +5º C to +35º C (+41º F - +95º
F). Failure to maintain proper operating temperature may result
in difficulty reading the display, thermal overload, or system
wide instability. Avoid exposing the unit to direct sunlight.
When placing the unit in an installation, make sure that it is
placed on a stable surface, as far away from vibrations as
possible. Even though the unit is impervious to vibration, the
storage devices (specifically hard drive based devices) that
are designed to be used in conjunction with it are typically not.
Also be sure not to place or use the player on heat generating
sources, such as amplifiers or near spotlights.
P L AYA B L E F O R M AT S
The MDJ-1000V2 plays music files on USB and CD storage
devices. All of the following file formats are supported:
• WAV (16-bit PCM, sample rates of 8 kHz, 11.025 kHz, 12
kHz, 16 kHz, 22.50 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz)
• MP3 (16 bit, 44.1 kHz, MPEG-I, Layer III)
• AAC (16 bit, 44.1 kHz, stereo, AAC Core, AAC Plus, AAC
Plus v2)
• AIFF (16 bit, 44.1 kHz, stereo)
Supported file systems on USB Storage Devices include:
• FAT
• FAT32
• HFS+
• NTFS
4
i n t r o d u c t i o n
U S I N G M I D I
C O N T R O L A N D AU D I O
When placed in MIDI mode, the MDJ-1000V2 can send MIDI
data from the buttons and dials to a computer to control the
parameters and playback controls of DJ software. The audio
playback from the computer can also be output from the
MDJ-1000V2.
Before using the MDJ-1000V2 as an audio device, connect
the MDJ-1000V2 with a USB cable and allow your PC/MAC to
detect it. Open your DJ software and select the MDJ-1000V2's
output device in the DJ software's settings. For instructions on
how to do this, see your DJ software's operating instructions.
C O N N E C T I N G TO
A C O M P U T E R
The MDJ-1000V2 is a plug and play device that requires no
software installation. The MDJ-1000V2's audio and MIDI drivers
are compatible with PC and MAC.
• To use the MDJ-1000V2 with a computer using Windows,
connect the MDJ-1000V2 to your PC after starting up the
computer. The MDJ-1000V2 will configure standard WDM
drivers.
Select the MDJ-1000V2 as your device to use it as your audio
device. ASIO drivers can also be configured for use with the
MDJ-1000V2 and are available at geminisound.com
• To use the MDJ-1000V2 with a computer using the OSX
operating system, connect the MDJ-1000V2 to your MAC
after starting up the computer. Use the system's standard Core
Audio drivers and select the MDJ-1000V2 as the device.
m d j -
1 0 0 0 V 2
m a n u a l g e m i n i s o u n d . c o m
•