Hitachi SF-P130XWV Operating & Installation Instructions Manual page 20

Partial Operations Using the Fuzzy Program
If you want...
Operations
1.
2.
3.
4.
5.
Remarks
20
To rinse only
Rinse only
Setting method
Set the amount of water.
If the amount of water is not set, then maximum
water level is used.
■
Set the number and
type of rinses with the
Rinse button.
■
Press Wash button
repeatedly until wash
indicator turns off.
Press Spin button
repeatedly until spin
indicator turns off.
Press the Start/Pause button to start.
Drains water and spins
before rinsing. Stops
while the rinse water is
still in the tub.
To rinse and spin
Rinse  Spin
Turn on the power.
Select the Fuzzy program.
■
Set the number and
type of rinses with the
Rinse button.
■
Set the spin time with
the Spin button.
■
Press Wash button
repeatedly until wash
indicator turns off.
Drains water and spins
before rinsing.
To drain and spin
Drain  Spin
Cannot be used.
■
Set the spin time with
the Spin button.
■
Press Wash button
repeatedly until wash
indicator turns off.
■
Press Rinse button
repeatedly until rinse
indicator turns off.
Drains water and spins.