Advertisement
Quick Links
Questions, problems, missing parts? Before
returning to your retailer, call our customer service
department at 1-800-288-4002, 6 a.m. - 5 p.m.,PT
and 9 a.m. - 8 p.m.,ET, Monday - Friday
ATTACH YOUR RECEIPT HERE
Purchase Date ___________________
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
WARNING:
•
Follow the installation instructions carefully. Proper installation is the installer's responsibility.
•
Failure to follow correct installation procedures can result in the faucet being loose, which can result in serious injury.
•
Not suitable for installation in concrete floors.
CAUTION:
•
Check local building codes before beginning installation to ensure compliance.
PREPARATION
Before beginning the assembly of this product, make sure all parts are present. Compare parts with the package
contents and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 90 minutes (including removal of old faucet)
Tools Required for Assembly (not included): Adjustable Wrench, Silicone Sealant, Phillips Screwdriver, Pencil, Electric Drill
Jacuzzi
®
Item # NW50827 (CP) / NW50826 (BN) / NW50845 (ORB)
ITEM / ARTICLE / ARTÍCULO # 0577330 (CP)
MODEL # 67662-X5101 / 67662-X5104 / 67662-X5127H2
1
NW50817 (MB) / NW50818 (BB)
TUB FILLER FAUCET
67662-X517001 / 67662-X518204
2019/04/08 V2
Advertisement
Related Manuals for Jacuzzi 67662-X5127H2
Summary of Contents for Jacuzzi 67662-X5127H2
- Page 1 Item # NW50827 (CP) / NW50826 (BN) / NW50845 (ORB) NW50817 (MB) / NW50818 (BB) ITEM / ARTICLE / ARTÍCULO # 0577330 (CP) TUB FILLER FAUCET MODEL # 67662-X5101 / 67662-X5104 / 67662-X5127H2 Questions, problems, missing parts? Before returning to your retailer, call our customer service 67662-X517001 / 67662-X518204 department at 1-800-288-4002, 6 a.m.
-
Page 2: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY Faucet Plastic Wrench Standpipe Escutcheon Screw (ST6.3x1.8) Anchor Hand Shower Shower Hose 2.5mm Hex Wrench... - Page 3 ASSEMBLY INSTRUCTIONS 1/4 in. dia. Floor Floor Drill a hole 2 1/4 in. diameter min. - 2 9/16 in. diameter Loosen the set screw (1) pre-assembled to the Place the escutcheon (1) over the standpipe (2) max. in the floor with an electric drill (1). Mark the spout (2), rotate the spout (2) about 90°...
-
Page 4: Care And Maintenance
ASSEMBLY INSTRUCTIONS Connect the flexible supply lines (1) to the water Flushing debris and checking for water leaks: supplies (2). Important: After installation is complete, remove the aerator (2) with the plastic wrench to flush debris from the water lines. Do not lose the o-ring(1) in the aerator(2).Turn on the water supply and allow both hot and cold water to run for at least one minute each. -
Page 5: Warranty
WARRANTY The manufacturer warrants this faucet to be free from defects in workmanship and material present at time of shipment from the factory for a limited lifetime from the date of purchase. This warranty applies only to the original purchaser. The manufacturer agrees to correct such defects at no charge or, at our option, replace the faucet with a comparable or superior model.