Epg Timer - Toshiba 19DV615DB Owner's Manual

EPG Timer

You can choose whether or not the screen switches on when the timer event begins - please see
page 18 (Rec screen status (LCD Power on/off)). This is so that if you are using the timer to make
a recording to your VCR or other device, the TV screen will not switch on unless you want it to.
If you try to switch to another channel while a timer event is in progress, the following message
will appear: 'WARNING: CHANGING THE CHANNEL WILL INTERRUPT YOUR EVENT TIMER. ARE
YOU SURE YOU WANT TO PROCEED? YES/NO'. Select Yes or No according to your wishes.
Note:
• When the EPG Timer starts, the
message "Event Timer Started" will
appear.
• A maximum of eight Timers can be
programmed.
• If the EPG Timer starts when it is
already switched on, it will start at the
exact time that is set. If it starts from
the standby mode, it will begin 20
seconds in advance of the stated time.
• You cannot hasten the start time from
the original start time of the Event.
• You cannot set with the same date
and time of another Event.
• Press the Yellow button to change
the start time of the event.
• Press the Blue button to change the
time duration of the event.
• If the EPG Timer begins during
standby mode, the
indicator on the unit will be lit in
orange. This is to indicate that an
EPG Timer event has begun in
standby mode.
• When in power-off-condition, EPG
Timer cannot be activated.
30
52R0201A_ENG.indd 30 52R0201A_ENG.indd 30
1
Press GUIDE to display the Guide menu. Then press
▲/▼/◀/▶ to highlight the programme you want to set as a
timer event, then press ENTER.
Note:
• If you select an event which has already started, the selected
program will be displayed on the screen, as you cannot set
the timer for a programme which has already started.
• To display the stored timer events, press GUIDE twice.
The Event Timer menu (see step 3 below) will appear. You
can also delete or change the frequency (Once / Daily /
Weekly) of the stored timer events (but please note that
you cannot edit the time details that have been set from
the EPG).
2
The confirmation banner will be displayed.
Press ◀ or ▶ to select 'Yes' or 'No', then press ENTER (the
selected option is shown in blue).
3
The Event Timer menu will appear.
Press the Red button to set the Timer mode for a selected
event.
4
The Timer mode
specifies the
frequency of Timer
wake-up which can
be set as Once,
Daily or Weekly.
(Power)
Press ENTER to
save the selected
Timer mode.
Note:
To delete a timer event, select the specified event, then
press the Green button.
5
To return to the Guide menu, press DIGITAL MENU.
To clear the menu screen, press EXIT.
Guide 16:50 Sun 20/08/2008
671 MNO S u n 2 0 0 /
671_MNO_10Step_0820_0100_0120_Audio2_0100_0120...
Channels 01:00 01:30 02:00
MNO 671_M... 671_M... 671_MNO_10step
PQS 672_PQR_SMPTE_col... 672_PQR_SMPTE_col...
STU 673_STU_SDTV... 673_STU_SDTV Moving...
TCM
No Event Name
VWXYZ
679_VWXYZ_Monosoo_0100_0300...
SAT.1 No Event Name
No Event Name
ARTE
DEF No Event Name
Page - Page + Prev.Day Next Day
Navigate Enter View Info Exit Guide
Event Timer
Service Name Mode Date Time Duration
BBC ONE Once 26/02/08 08:10 00:23
Timer mode Delete Timer
Edit Timer Edit Duration
Navigate Enter Exit
Event Timer
Service Name Mode
BBC ONE Once
Once
Daily
Weekly
TV
8 2 / 0 0 8
TV/Radio
Date
26/02/
3/4/09 10:21:08 AM 3/4/09 10:21:08 AM