PACE Technologies obligation under this warranty shall be limited to the repair or exchange, at PACE Technologies option, of any PACE Technologies Product or part which proves to be defective as provided herein. PACE Technologies reserves the right to either inspect the product at Buyer’s location or...
Page 4
Products shall pass to Customer upon PACE Technologies delivery of the Products to the common carrier of Pace Technologies choice, or the carrier specified in writing by Customer, for shipment to Customer.
Web: https://www.metallographic.com 2.0 Shipping, Unpacking, and Installation 2.1 Shipping • The FEMTO-1500S comes pre-installed if ordered with a NANO-S polishing unit • Ensure all parts are included when unpacking box • If purchased as an upgrade to an existing NANO-S polishing unit, the FEMTO-1500S ships in a custom designed box.
Hold all samples securely (using two hands is recommended) 3.3 Emergency Statement The FEMTO-1500S had been designed to fit the mounted samples in the diameter of the sample holder. DO NOT GRIND OR POLISH oversized or misfit samples. Always follow proper operational guidelines and avoid contact with moving parts, lubricants and abrasives.
4.1 General The FEMTO 1500S is an automatic polishing head for the NANO-S line of PACE Technologies’ metallographic equipment line. The FEMTO must be paired with a NANO-S polishing base to utilize its functionality. A ZETA-2000 abrasive dispenser is able to be used in conjunction with the FEMTO and...