Use 2 ¼" (58mm) width paper tape.
1) Gently spread plastic paper roll holders apart far enough to disengage the old
paper roll core.
2) Tear off any paper which may remain on the spent paper roll.
3) Press the paper advance
4) Position the new paper roll on the paper roll holders with the leading edge feeding from the
bottom of the roll.
5) Fold the leading edge back to form a straight edge and insert the leading edge of the paper into
the slot located below and between the paper roll holders.
6) Press the paper advance
printing position.
CHANGING THE PAPER TAPE
key to remove any remaining paper from the spent roll.
key to advance the paper through the printer until it reaches the
4