Installing Paper Roll - Monroe 8130X User Manual

b
Changing
the Paper Tape
To ensure ease of installation, read the instructions
b
completely before installing a new paper roll. Then
follow the instructions step-by-step.
1. Tear off excess paper at the tear-off knife.
To remove cover, place thumbs on serrated
2.
surfaces located on each side of the cover.
b
Pressing down with your thumbs, slide the top
cover toward the back of the calculator. Once
the cover has been pushed back approximately
1", lift the cover off.
f
P
f
3. Lift up and remove old paper roll from the
P
paper roll holders. Tear off paper between the
used paper roll and the printer. Pull remaining
t
paper through the printer by continuously
lifting the leading edge (nearest display).
4. With the leading edge of the new paper roll,
u
feeding from the bottom, place the new roll
p
into position between the two flexible paper
roll holders.
u
p
5. Feed the paper into the rear of the printer
mechanism until it meets resistance
(approximately 1 to 1.5 inches). Depress the
paper advance button until the paper extends
several inches beyond the printer mechanism.
8
a
Rotate spools to
Rotate spools to
Rotate spools to
Then
Then
Once
Tear off paper between the
Pull remaining
Tear off paper between the
Pull remaining
Depress the
Apply a firm downward
Apply a firm downward
a
6. Feed the paper through the opening of the
tear-off knife and lay top cover flat on the
calculator leaving a 1" overhang at the back
of the top cover. Apply a firm downward
and forward pressure, slide the top cover
forward until it snaps into position.
7. Tear off any excess paper.