Fujitsu ASTG30KMTC Service Manual page 179

6. Press the ENTER switch button (SW3) and fix it.
7. To return to "Operating status display (Normal operation)", press the EXIT switch button (SW4).
NOTE: When pressed number is lost during setting, you must redo the setting procedure. Return to
"Operation status display (Normal operation)" by pressing the EXIT switch button once, and
restart from the beginning of the setting procedure.
2-2. Local setting procedure
0 % of rated input ratio
50 % of rated input ratio
75 % of rated input ratio
100 % of rated input ratio
- (05-15) -
PEAK CUT
(L4) (L5) (L6)
2. Function settings (For outdoor unit: AOTG34KMTC only)