Fujitsu ASTG30KMTC Service Manual page 167

1) Remote controller address setting
NOTE: Because this setting is normally done automatically when 2-wire-type wired remote con-
troller is installed, setting is unnecessary.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function number
00
NOTE: When different type of indoor units (such as wall mounted type and cassette type, cassette
type and duct type, or other combinations) are connected using group control system, some
functions may no longer be available.
2) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number
11
1-1. Function settings by using remote controller
Setting value
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Setting value
00
01
02
03
- (05-3) -
Setting description
Unit no. 0
Unit no. 1
Unit no. 2
Unit no. 3
Unit no. 4
Unit no. 5
Unit no. 6
Unit no. 7
Unit no. 8
Unit no. 9
Unit no. 10
Unit no. 11
Unit no. 12
Unit no. 13
Unit no. 14
Unit no. 15
Setting description
Standard (400 hours)
Long interval (1,000 hours)
Short interval (200 hours)
No indication
Factory setting
♦
Factory setting
♦
1. Function settings (For indoor unit)