Advertisement
Quick Links
DCA12 Dash Camera User Manual
This product combines wide dynamic digital industry leading camera, no leakage of footage, seamless circular camera, ultra wide-
angle shooting, with display real-time playback, it uses Novatek 966558 Chipset. This chipset integrates cutting-edge technologies,
including 4x FHD video decoding technology, intelligence power performance scaling system, HD multi-screen display processing It
provides a high definition video compression and a smooth imaging.
This manual will detail how to install, operate, product parameter and matters needing attention. Please read carefully and keep it safely after
usage. Please note that the specification in this user manual may subject to update without prior notice. Please always refer to the actual
product for updated specification.
Copyright infringement / privacy notice
Please note that this product is for personal use only, its method of use and image recorded shall not infringe international copyright / privacy
laws.
Accessories check
The following standard list and selection. If there are any missing or damaged items, please contact your dealer immediately.
Standard Accessories included
Windscreen Suction Mount
Car charger
USB Cable
User Manual
www.elinz.com.au / sales@elinz.com.au / 1300 881 773
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Elinz DCA12
Summary of Contents for Elinz DCA12
- Page 1 Accessories check The following standard list and selection. If there are any missing or damaged items, please contact your dealer immediately. Standard Accessories included Windscreen Suction Mount Car charger USB Cable User Manual www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 2 Short press OK to stop or start recording/ In Photo mode, short press OK to take photos/ Act as confirm key in Menu mode. PS: Press OK to stop recording before able to access other mode www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 3 HDMI Output HD output port, used to connect high-definition display devices Bracket slot Bracket slot Connect the car charger to supply power to the dash camera Microphone For recording audio Reset button System restart reset button www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 4 If modification of power line required, please engage a professional installer. Note: When the equipment in the recording state, do not remove or insert the memory card to avoid damage of the memory card. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 5 / time, then press the OK button to enter the setting 3. Or by pressing the buttons to adjust the value, press the OK button to enter another field. Until the completion date and time settings, press @ exit. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 6 1. Press the M key to switch to the camera mode, camera icon in the upper left corner of the screen display. 2. Press the OK button to take pictures, take pictures of the screen flashes once to indicate camera complete. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
-
Page 7: Special Features
Gravity sensor can be adjusted in the menu high - medium - low, medium factory default. 2. File locking feature The imaging process, the Lock key is pressed, the machine will not delete the current video and saved as a file. www.elinz.com.au / sales@elinz.com.au / 1300 881 773... - Page 8 After switching on the car power, the red charging indicator lights up in charge of the process, the whole charging time is approximately 180 minutes, the red charging indicator light will automatically turn off after charging is completed. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 9 ：Camera icon indicates camera mode; 1、 ：Camera icon indicates camera mode ：Playback icon, indicating the playback mode ：Flashing red indicates that the device is recording; yellow dot blinking motion detection device in standby 2、 www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 10 ：Motion detection icon; on the left side of the screen displays the icon, indicating that the feature is activated. 9、 ：Recording function Open icon 10、 ：Recording function Close icon Open the Settings menu and synchronized recording function on or off this icon appears, indicating the current recording function on or www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 11 On, Off , the proposed full-time open Exposure Underexposed, dim the screen, you need to fill light +0.0、-1/3、-2/3、-10、-4/3、-5/3、-2.0、+2.0、 Compensation +5/3、+4/3、+10+2/3、+1/3 Motion Detection In standby mode, when the screen has moved to the On, Off www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 12 Vehicles can enter grades, displayed on the video A00000 file Format You can delete memory card data above The default setting Restore factory settings Cancel, OK Screen Saver Recorder automatically turns off the display work On, Off www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 13 Current Frequency 50HZ/60HZ Continuous Loop Seamless loop recording, no leakage seconds 1：USB-Disk recording 2：PC-Camera Truck switch Machine Support auto ignition on, turn off shutdown Power 5V 1A Motion detection Support Battery Built-in 180mAh www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 14 Each time the camera settings cycle is not the same: Check if motion detection function is on, because the camera motion detection state length of time, depending on the screen if there is no movement. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
- Page 15 For any inquires, issue or comments concerning our products, feel free to contact us at 1300 881 773, Send us an email at sales@elinz.com.au and we will respond as soon as possible or chat with us. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Need help?
Do you have a question about the DCA12 and is the answer not in the manual?
Questions and answers