Download Print this page

Advertisement

Quick Links

DCDUAL
USER MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the DCDUAL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elinz DCDUAL

  • Page 1 DCDUAL USER MANUAL...
  • Page 2 1. USB interface 8. Menu key This product uses a high performance chip, provides the high definition video, dynamic images seamless. Support FHD1296P real 2. Rear camera interface 9. Reset hole full HD video. Please read this manual carefully before using. We hope that our products can meet your needs and provide a long-term 3.
  • Page 3 2. MODE key When the reversing camera is connected to the dash cam, dual cameras display will automatically show on the screen. Under Function 1:Mode key recording mode, short press 【Up】 button to switch between 4 types of display mode: Front camera only, Rear camera only, Press OK to pause the video recording, short press the Mode key, Picture in picture, split screen display the camera photograph/playback/video can be switched with each...
  • Page 4: Installation Guide

    In the file explorer mode, press the Ok key to play video Press OK to pause the video recording, press the [Menu key] to enter the main menu function setting table. Press the [up/down] Function 4:Confirm key to select the option to be set. Press [Enter] to confirm. After setting, press the Menu key until you exit the menu setup function.
  • Page 5 5. Extension cable charging the recorder's USB connector and car charger is connected. Installation of wiring diagram suggested below. [Note] Reduces charging extension cord wiring can be laid along the edge of the windshield. 6. The rear camera is installed in the rear of the vehicle. Pay attention to the direction of installation.
  • Page 6 3. Connect the black wire to the negative of the reversing light. Reversing camera installation 4. Connect the video cable to the “Reversing camera input” of the dash cam (this will feed the video image from the camera to the dash cam, and also provide power to the camera when the car is on forward gear).
  • Page 7 b. Front, rear camera and video camera are recorded separately 5. G-sensor function to the "MOVIE" and "PHOTO" folder. The unit features an impact sensor (G-sensor). If a serious vehicle collision, the recorder will lock the first 10 seconds, and 20 2.
  • Page 8 selectable modes. Press up key [Up] / [Down] keys to select the 7. Date and time settings Disk option. Then press [Enter] to enter the U disk mode. Press OK to pause the video recording, short press [Menu] key to enter the system setup menu, press the down arrow key [Up] / 10.
  • Page 9: Product Specifications

    13. Exposure Now, the dash cam comes standard set to a +0.0 exposure, which is 4. Product Specifications essentially baseline. This level of exposure will account for every day lighting scenarios, bright days, darker days, etc. The exposure and Display 4.0 Inch High Resolution Screen aperture both determine how much light is being allowed into the lens of Front camera...
  • Page 10 Video output Memory card TF Card Seamless video Memory card 8GB--32GB capacity Boot automatic supported recording USB interface USB2.0 Mini5Pin Gravity induction When car crash, it will emergency save videos, Operating system Windows 2000, XP Windows, Windows 7, etc. not to be deleted Battery 3.7V 200mAh high rate polymer battery Manual lock...
  • Page 11 Instructions to use: • For best result in using Dash Camera, we definitely recommend to keep it plug-in into the car cigarette charger. This will allow you to use or record for a longer period of time. Dash Camera uses a lot of battery due to G Sensor system of the camera.