Table of Contents
Advertisement
Quick Links
Product Introduction
1）USB
4）Up Button
7）Lens
10）SD Card Slot
Description of Function Keys:
1）USB
USB data interface, (1) Storage; (2) PC Camera
2）Bracket Mounting Hole
Connect the car bracket mounting screw holes;
3）OK
User Manual
2）Bracket Mounting Hole
5）Down Button
8）LED
11）Microphone
3）OK
6）Power
9）Display
12）Reset
Advertisement
Table of Contents
Related Manuals for Elinz DCSIMPLE
Summary of Contents for Elinz DCSIMPLE
- Page 1 User Manual Product Introduction 1）USB 2）Bracket Mounting Hole 3）OK 4）Up Button 5）Down Button 6）Power 7）Lens 8）LED 9）Display 10）SD Card Slot 11）Microphone 12）Reset Description of Function Keys: 1）USB USB data interface, (1) Storage; (2) PC Camera 2）Bracket Mounting Hole Connect the car bracket mounting screw holes;...
- Page 2 Video and take pictures to confirm button, the camera mode, short press this key to start recording again press stop recording; camera mode Short Press to take pictures; 4）UP Button Used for upward movement in menu 5） Down Button ...
- Page 3 Press the power button , the blue indicator light lights up at boot time Again press the power button is turned off, the blue light goes out Note: The recording instrument will be prompted to low battery voltage automatic shutdown when battery is low ...
- Page 4 Time setting Long press key to enter the set state ， though button to select the date and time options,short press key enter ,key in Year / Month / Day / Minutes / Seconds between each other to switch though adjust the required value，press confirm the modification...
- Page 5 Loop Recording Off,1 Minutes,5 Minutes,8 Minutes Camera 12M, 10M, 8M, 5M, 3M, 2MHD, 1.3M, VGA Date Stamp Off, On Quality Fine,Normal,Economy Sharpness High,Normal,Soft White Balance Auto,Day light,Cloudy,Tungsten,Fluorescent Anti-Shaking Off,On Auto power off Support auto ignition boot, turn off shutdown Quick Review Off,2 Seconds,5 Seconds Date/Time Support (YY/MM/DD)
- Page 6 Color is not perfect in cloudy day and outdoor light Set the “white balance” function to automatic Cross stripe interference in image Because of wrong “light frequency”, please set it to 50Hz or 60Hz according to the local power supply frequency ...
Need help?
Do you have a question about the DCSIMPLE and is the answer not in the manual?
Questions and answers