Page 1
HD quality videos directly to your smartphone and share these on social media easily with friends and family. This new Elinz dash camera is equipped with a built-in supercapacitor, which is much more durable and safer than normal battery Please read this manual carefully before using.
Page 2
10. THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE DRIVING. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
• This device is intended to be used inside the vehicle only. Install this device in a location where it has unobstructed view of the road but does not interfere with the driver's view. Please check your local and regional law before mounting to windshield. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
[Note] Reduces charging extension cord wiring can be laid along the edge of the windshield. 6. The rear camera is installed in the rear of the vehicle. Pay attention to the direction of installation. Wiring can be laid along the vehicle roof. After www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 6
1. Open the "Google Play Store" search "Roadcam" Or scan the QR Code to download and install. B. IOS system Apple phone 1. Open the "Apple App Store" search "Roadcam" Or scan the QR Code to download and install. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 7
7. On the APP settings, you also can change the camera setting. 8. Short press the ‘OK’ key on the camera to disconnect the WiFi and then press the ‘UP’ or ‘Down’ key to ‘Refresh’ or turn off the WiFi. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Note: only can be used while use ACC cable. G-sensor Turn Off or adjust the sensitivity (Low/Middle/High) of the G-Sensor to defect forces which will automatically protect the current recording in event of a collision. Default Setting: Off www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 9
Default setting: 60Hz License The camera has an option to program your car's license plate number into it, and have that display as an 'overlay' on the recorded video. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 10
Default Setting: Off Key Voice Turn on/off the Key Voice, key button operation voice on/off Default Setting: On Fill Light Turn ON/OFF/AUTO fill light, LED light will on/off/auto Default Setting: Off www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 11
Press OK to pause the video recording, short press the Mode key, the camera photograph/playback/video can be switched with each other. In camera mode, press OK to take photo. In playback mode, short press Menu to delete www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 12
4. OK key Function 1:Enable / Disable recording function In the video mode, press the Ok key to start recording and short press the Ok key again to stop recording. Function 2:Take photo www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 13
Function 2:Open Led light, Long Press [Menu key] to turn on Led light, long-press [Menu key] to turn off Led light again www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 14
5. In the reverse image state, use the [Up] / [Down] keys to adjust the position of the reference line. After that, the adjustment will be saved. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 15
30 seconds, the system will stop recording. To exit the motion detection mode, long press on the turn button for 3 seconds to exit the motion detection mode. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 16
8. A mute button function In working condition, short press the [Down] key, the screen changes to prohibit the bottom left of the microphone icon, indicating that audio www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 17
Turn this function on/off under menu settings. 13. Exposure Now, the dash cam comes standard set to a +0.0 exposure, which is essentially baseline. This level of exposure will account for every day lighting www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 18
If you do not want the screen to turn off by itself, please select OFF. 15. Rear camera mirroring Enable rear camera video recording, turn on/off under menu settings. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Windows 2000, XP Windows, Windows 7, etc. Battery Super Capacitor Power waste Double recorded video MAH 500-700 Power Supply Vehicle mounted power 5V/2A Storage temperature -10 C ~ 70 C Operating temperature -10 C ~ 60 C www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 20
If the loop recording is not working, it is also possible that gravity sensor is open, the files on memory card are all locked. Close the gravity sensor setting, and the format the memory card. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 21
"RESET" the reset button to restore restart. If you have further questions or clarifications feel free to contact us at 1300 881 773, send us an email at sales@elinz.com.au or chat with us. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Need help?
Do you have a question about the DC2KWIFI and is the answer not in the manual?
Questions and answers