Table of Contents
Advertisement
Finding the controls
Main unit
1
Liquid crystal display
Intercom/Edit/Character Input Mode button
2
3
Hold button
Speed Dialer button
4
Auto Answer button & indicator
5
—light on: answering device activated.
—light off: used as a regular telephone.
Playback button plays back recorded messages.
6
Flash button (For call waiting service users.)
SD button
7
8
Monitor button
SD Memory Card cover
9
10
Call/Fax List button starts a search in
— the Number Display (Caller ID) log.
— the fax list stored in memory.
Call/Fax List indicator lights when
11
— a call was missed.(For Number Display
service users.)
— a fax was stored in memory.
Block button for undesired calls
12
13
Secure button
While the unit is ringing, press this button.The unit
announces a message to the caller. The message
is announced in Japanese and means "This unit is
currently set to Caller Verifying mode. Could you please
speak out your name?".
To talk to the caller, lift the handset.
To hang up, press
Resolution button selects the resolution when faxing
or copying.
Record button records a telephone conversation. If an
14
SD Memory Card is available (inserted), the telephone
conversation will be recorded to the SD Memory Card.
To record a telephone conversation, press
(Record)
voice message).
To stop recording, press
2 2
.
(Cancel the precaution
(Stop).
15
Enhanced Record button records the previous 10
minutes of the current telephone conversation.
If an SD Memory Card is available (inserted), the
telephone conversation will be recorded to the SD
Memory Card.
To record the previous 10 minutes of telephone
conversation, press
To stop recording, press
Erase button
16
Volume/Change/Redial/Phonebook key
To adjust the volume (see below).
To change Hiragana into Kanji.
To adjust the ringer volume when the unit is on
stand by, press
機能/
(Function/Set)
決定
(Stop).
To adjust the receiver volume while talking,
press
repeatedly.
To adjust the speaker volume while listening to
the recorded messages or using the monitor,
press
repeatedly.
To redial the phone numbers in the redial
list. The last 10 phone numbers dialed are
stored in memory.
To use the phonebook.
機能/
To register a function or apply a setting.
決定
17
Fax button starts faxing.
18
Copy button starts copying.
19
Stop button
Tone button switches to tone dialing.
Night mode button
Sharp button
Key lock button can lock the main unit so that no calls
or settings can be made. To turn key lock on, press this
button for about 3 seconds until a single beep is heard.
"
" is displayed.
To turn key lock off, press this button for about 3 seconds.
(Enhanced record).
(Stop).
(Select "呼出音量変更")
(press repeatedly)
Advertisement
Table of Contents
