Table of Contents
Advertisement
AP2030DN
Product Description
Product
Characteristics
High-speed and
reliable wireless
access
Comprehensive
user access control
capability
High network
security
Flexible
networking and
environment
Issue 01 (2015-03-10)
Description
Compatibility with IEEE 802.11a/b/g/n/ac.
2 x 2 MIMO and a maximum rate of 1.16 Gbit/s
Supports Wi-Fi Multimedia (WMM) and priority mapping on the
air interface and wired interface.
Working simultaneously on 2.4 GHz and 5 GHz frequency bands
Supports wired link integrity check.
Supports roaming without service interruptions.
Supports beamforming.
Uses the latest 802.11n chip to provide higher performance and
wider coverage.
Supports airtime scheduling which ensures fairness in channel
occupation time for all users.
Supports access control lists (ACLs) and implements user access
control based on the user group policy.
Provides fine-grained bandwidth management for each user.
Supports user isolation policies.
Supports uniform authentication on an AC.
Identifies the device type according to the organizationally unique
identifier (OUI) in the MAC address, user agent (UA) information
in an HTTP packet, and DHCP options in Fit AP mode.
The RADIUS server delivers packet forwarding, security, and
QoS policies according to the device type carried in the RADIUS
authentication and accounting packets.
Open system authentication
WEP authentication/encryption
WPA/WPA2-PSK authentication and encryption
WPA/WPA2-802.1x authentication and encryption
WAPI authentication and encryption
Wireless intrusion detection system (WIDS) and wireless
intrusion prevention system (WIPS), including rogue device
detection and countermeasure, attack detection and dynamic
blacklist, and STA/AP blacklist and whitelist
Auto shutdown of the AP's wired interface. In some cases, a loop
may occur on a network connected to the AP's wired interface, for
example, when the AP and the network are connected through a
hub. The auto shutdown function enables the AP to automatically
shut down its wired interface for protection.
NOTE
This function takes effect only when the wired network connected to the AP's
wired interface does not terminate STP packets from the AP.
Has strong environment adaptability. The AP can automatically
select the transmission rates, channels, and transmit power to
adapt to various radio environments and avoid interference in real
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Product Positioning and Characteristics
4
Advertisement
Table of Contents
