Bryant 912SC Installation, Start-Up, Operating And Service And Maintenance Instructions page 85

Casing Group
Blower door
Bottom plate
Control door
Door knob assembly
Top filler plate
Electrical Group
3- -Amp fuse
Circuit board
Control box
Door switch
Junction box
Limit switch(es)
Transformer
Blower Group
Blower housing
Blower motor
Blower wheel
Capacitor (when used)
Capacitor strap (when used)
Cut- -off plate
Power restrictor (where used)
Filter Group
Filter(s)
Media Cabinet (when used)
TO OBTAIN INFORMATION ON PARTS: Consult your installing dealer or classified section of your local telephone directory under
"Heating Equipment" or "Air Conditioning Contractors and Systems" headings for dealer listing by brand name or contact:
Have available the model number, series number, and serial number located on the unit rating plate to ensure correct replacement part.
COOLING
MODEL
CAPACITY
912SC
FIRE, EXPLOSION, ELECTRICAL SHOCK AND CARBON MONOXIDE POISONING HAZARD
Failure to follow this warning could result in dangerous operation, personal injury, death or property damage.
Improper installation, adjustment, alteration, service, or maintenance can cause personal injury, property damage, or death. Consult a
qualified installer, service agency, or your local gas supplier for information or assistance. The qualified installer or service agency
must use only factory- -authorized replacement parts, kits, or accessories when modifying this product.
E2018 Bryant Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
PARTS REPLACEMENT INFORMATION GUIDE
BRYANT HEATING & COOLING SYSTEMS
Consumer Relations Department
Syracuse, New York 13221- -4952
HEATING
CAPACITY
30 040
WARNING
!
Gas Control Group
Burner
Flame sensor
Gas valve
Hot surface igniter
Manifold
Orifice
Heat Exchanger Group
Containment plate
Coupling box
Heat exchanger assembly
Primary HX cell panel
Secondary HX assembly
Tubing gaskets
Inducer Group
Collector box
Condensate trap
Condensate trap elbow
Gaskets
Inducer
Inducer assembly
Inducer motor capacitor (when used)
Inducer motor module (when used)
Pressure switch(es)
P.O. Box 4952
1- -800- -428- -4326
Model Nomenclature
MOTOR WIDTH
E 14
Edition Date: 11/18
85
FEATURES/
VOLTAGE MINOR
SERIES
A - -A
Catalog No. II912SC ---07
Replaces: II912SC--- 06