Hot Surface - Brother MFC-L8895CDW Product Safety Manual

DO NOT place the following objects on the product.
If these objects contact the electrical parts inside the product, it may cause a fire or electrical
shock.
• Metal objects such as a clip or a staple
• Precious metals such as a necklace or a ring
• Containers holding water or liquid such as a glass, a flower vase, or a flower pot

HOT SURFACE

Immediately after using the product, some internal parts of the product will be extremely hot.
Wait at least 10 minutes for the product to cool down before you touch the internal parts of the
product.
If the product becomes unusually hot, releases smoke, generates any strong smells, or if you
accidentally spill any liquid on it, immediately unplug the product from the AC power outlet.
Contact Brother Authorized Service Personnel.
Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the
danger of suffocation, keep these bags away from babies and children, and dispose of them
properly.
(MFC models only)
Use caution when installing or modifying telephone lines. Never touch telephone wires or
terminals that are not insulated unless the telephone line has been unplugged from the wall
jack.
Never install telephone wiring during a thunderstorm. Never install a telephone wall jack in a
location that is wet or may become wet, for example, near a refrigerator or other appliance
that produces condensation.
8