Editing (2); Uniform Stitch Adjustment (Mode 2 And 3 Only) - Janome Craft 6600P Instruction Manual

Janome 6600 Instruction Manual
1
2
(1) (2) (3)
www.toews.com

EDITING (2)

Uniform stitch adjustment (Modes 2 and 3 only)
The stitch width and length of the programmed stitch
patterns can be uniformly altered.
Example 1: To alter the stitch width of the programmed
Shift the cursor to the right of the last programmed
pattern.
Press the stitch width adjusting button to alter the stitch
width.
NOTE:
Stitch length can be uniformly altered when patterns of
the same category (satin stitches or stretch stitches) have
been programmed.
Start sewing. The programmed patterns will be sewn in the
uniform width.
Unified needle drop position:
The needle drop position of the programmed patterns will
vary depending on the pattern combination:
(4)
(1) Unified to the left when combining the patterns with the
(2) Unified to the right when combining the patterns with
(3) Unified to the center when combining the patterns with
(4) Unified to the center when combining the patterns with
7 9
patterns 41 and its mirror image in the
Mode 3.
1 Default Width
2 Uniformly Altered Width
left needle position and the center needle position.
the center needle position and the right needle position.
the left needle position and the right needle position.
the left, center and right needle positions.
MC6600P Owners Manual/ User Guide
Janome Sewing Machine