Tacking - Janome Craft 6600P Instruction Manual

Janome 6600 Instruction Manual
1
2
4
1
www.toews.com
2
3
3
6 2
Janome Sewing Machine

Tacking

Machine Settings
Pattern: 22 (Mode 3)
Thread tension:3-6
Presser foot: Satin Stitch foot F
Foot pressure: 3
The LCD screen shows the sewing instruction when
selecting pattern 22.
Tacking is used to reinforce pockets, crotches and
belt carriers where extra strength is needed.
To sew
Depress the foot control until the machine stops
automatically.
The machine will sew a tacking 1.5 cm (9/16") long
automatically.
1 Starting point
2 Ending point
3 1.5 cm (9/16 ")
To sew a shorter tack
To sew a tack shorter than 1.5 cm (9/16"), first stop
the machine after sewing the required length, and
then press the reverse button.
The required length has been determined.
Start the machine and continue sewing until the
machine stops automatically.
1 Starting point
2 Required Length
3 Reverse Button
4 Tack Length
To sew the same size tack
To sew another tack at the same size, simply start
the machine and it will stop automatically when
finishing sewing.
To sew the tack at a different size
To sew the next tack at a different size, press the
memory button to memorize a new size and start
sewing from the beginning.
MC6600P Owners Manual/ User Guide