Cooking Options; Settings - GE Profile TRATTORIA PS96PZRSS Owner's Manual

Cooking Options

The options pad opens up a menu of more cooking modes when the oven is off. It opens a menu with additional features
if a cooking mode is already in process. You can exit the menu at any time by pressing the Options pad again.
You must first select a mode (bake, convection bake, convection roast) and then select Options to get to the
following functions.
Air Fry
Air Fry cooking mode is designed to produce foods with
a crispier exterior than traditional oven cooking. See the
Oven Cooking Modes section for more information. Press
the Options pad and select Air Fry
pads to input the desired set temperature and press
Start/Enter.
Cook Time
Counts down cooking time and turns off the oven when
the cooking time is complete. Select a desired cooking
temperature. Press the Options pad and select Cook
Time
and minutes. Then press Start/Enter. This can only be
used with Bake, Convection Bake, Convection Roast,
and Air Fry.
Delay Time
time when you want the oven to start. Select a desired

Settings

The Options and Settings pads open up more detailed menus in the display that allow access to additional
functions. For each you select the function in the display using the associated number pad. You can exit at
any time by pressing the Options or Settings pad again.
WiFi Connect and Remote Enable
Your oven is designed to provide you with two-way
communication between your appliance and smart
device. By using the SmartHQ mobile app, you will
be able to control essential oven operations such as
temperature settings, timers and cooking modes using
your smartphone or tablet.*
Select Settings then Wifi - follow the instructions on your
oven display and SmartHQ mobile app. It is necessary to
turn on WiFi before using Remote Enable on your oven.
Connecting your WiFi Connect Enabled Oven
What you will need
Your oven uses your existing home WiFi network to
communicate between the appliance and your smart
device. In order to setup your Profile oven, you will need
to gather some information:
1. Each oven has a connected appliance information
label that includes an Appliance Network Name and
Password. These are the two important details that
* Compatible Apple or Android devices and home WiFi network required.
18
temperature. Press the Options pad and select Delay
Time
for the oven to turn on, and then press Start/Enter
Time is not available with all modes.
NOTE:
spoil easily – such as milk, eggs, fish, stuffing, poultry,
and port – should not be allowed to sit for more than
1 hour before or after cooking. Room temperature
promotes the growth of harmful bacteria. Be sure that the
oven light is off because heat from the bulb will speed
harmful bacteria growth.
Oven Probe (Lower Oven Only)
NOTE: Only accessible through traditional and
convection cooking modes.
Monitors internal food temperature and turns the oven
off when the food reaches the programmed temperature.
Insert the probe, press the desired cooking mode, and
program the probe temperature. See the Oven Cooking
Modes Section for more information. The probe can only
be used with Bake, Convection Bake, and Convection
Roast.
you will need to connect to the appliance. The label
is typically located inside the door of the oven or
drawer.
Connected Appliance Information
FCC: ZKJ-WCATA001
IC: 10229A-WCATA001
MAC ID: XX - XX - XX - XX - XX - XX
Sample Label
2. Have your smart phone or tablet ready with the ability
to access the internet and download the SmartHQ
mobile app.
3. You will need to know the password of your home
WiFi router. Have this password ready while you are
setting up your oven.
Network: GE_XXXXXX_XXXX
Password: XXXXXXXX
PT. NO. 229C6272G001-0
49-2000908 Rev. 0