Set Gap Sensor As Media Sensor And Calibrate The Gap Sensor - UltraTape UltraLabel PRO-600 User Manual

5.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor

Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns green and 5 blinks.

The LED will be changed as following:
red (5 blinks)  red (5 blinks)  red (5 blinks)  red (5 blinks) 
green (5 blinks) 
green (solid)
- 38 -