Table of Contents
Advertisement
Self-test
Printer will print the printer configuration after
used to check if there is any dot damage on the heater element, printer configurations and available memory
space.
Self-test printout
gap/black mark sensor calibration. Self-test printout can be
Model name
F/W version
Firmware checksum
Printer S/N
Configuration file
System date
System time
Printed mileage (meter)
Cutting counter
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap distance (inch)
Gap/black mark sensor intension
Code page
Country code
ZPL setting information
Print darkness
Print speed (inch/sec)
Label size
Control prefix
Format prefix
Delimiter prefix
Printer power up motion
Printer head close motion
Note:
ZPL is emulating for Zebra
language.
RS232 serial port configuration
- 32 -
®
Advertisement
Table of Contents
