MSI MS-98N9 Manual page 56

BIOS Setup
▶ Flow Control
Flow control is the process of managing the rate of data transmission
between two nodes. It's the process of adjusting the flow of data from one
device to another to ensure that the receiving device can handle all of the
incoming data. This is particularly important where the sending device is
capable of sending data much faster than the receiving device can receive
it.
▶ VT-UTF8 Combo Key Support
This setting enables/disables the VT-UTF8 combination key support for
ANSI/VT100 terminals.
▶ Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution
100x31.
▶ Putty Keypad
PuTTY is a terminal emulator for Windows. This setting controls the numeric
keypad for use in PuTTY.
Legacy Console Redirection
▶ Legacy Console Redirection Settings
▶ Redirection COM Port
This setting specifies the COM port for redirection.
▶ Resolution
This setting specifies the redirection resolution of legacy OS.
▶ Redirect After POST
This setting determines whether or not to keep terminals' console redirection
running after the POST has booted.
Serial Port for Out-of-Band Management/ Windows Emergency Management
Services (EMS)
▶ Console Redirection EMS
Console Redirection operates in host systems that do not have a monitor
and keyboard attached. This setting enables/disables the operation of console
redirection. When set to [Enabled], BIOS redirects and sends all contents that
should be displayed on the screen to the serial COM port for display on the
terminal screen. Besides, all data received from the serial port is interpreted
as keystrokes from a local keyboard.
3-20