Page 1
SANDBOX home.crs DIMENSIONS 8½” 96” 10” 96” TOP VIEW THREE-QUARTER VIEW SIDE VIEWS MATERIALS LIST Pressure Pressure Pressure Coated Deck Screws 4” Strap Hinges #8 x 3/4" 5-1/2" Door Pull Treated Treated Treated • 2" long, 48 (0.5 lbs.) • 12 hinges Wood Screws •...
Page 2
COMPONENTS LIST SANDBOX CONSTRUCTION Component Name Quantity Bench Block Bench Rail CUTTING THE COMPONENTS Box Side Fixed Lid Board Armrest The Cutting Diagrams show how each piece of lumber is to be broken Seat Board down. The components are numbered in the order they are assembled.
Page 3
3” Deck Screws - 24 • Connect the Bench Blocking (1) to the Bench Rails (2) as shown with • Form the sandbox by connecting the Box Sides (3) to the two bench 3" Deck Screws. assemblies with 3" Deck Screws.
Page 4
SANDBOX ASSEMBLY (continued) STEP 3. FIXED TOP BOARDS STEP 4. ARMREST ASSEMBLY *Spacer Block 2-½” Deck Screws - 16 3” Deck Screws - 88 Check and adjust the box for squareness. • Assemble four armrests by connecting Armrest (5) boards as shown with 2-½"...
Page 5
SANDBOX ASSEMBLY (continued) STEP 5. SEAT ASSEMBLY STEP 6. BACKREST ASSEMBLY 3rd Seat Board 2" Overhang 89" 2nd Seat Board 2" 2” Deck Screws - 48 2-½” Deck Screws - 48 Centre a Seat Board (6), best side down, on the armrest assembly as Place two Backrest Boards (7), best side down, on a flat surface as shown in Figure 1.
Page 6
SANDBOX ASSEMBLY (continued) STEP 7. SEAT TO BACKREST ASSEMBLY STEP 8. BACKREST HINGE INSTALLATION 36" 36" 36" 12" 36" 12" 4" Strap Hinge - 6 4" Strap Hinge - 6 #8 x 3/4" Wood Screws - 36 #8 x 3/4" Wood Screws - 18 Install three, 4"...
Page 7
Please ensure the manufacturer's instructions are followed in the ® use of all tools and materials and heed all recommended safety guidelines. ®CO-OP and design trademark are registered trademarks of Federated Co-operatives Limited, Saskatoon S7K 3M9...
Need help?
Do you have a question about the SANDBOX and is the answer not in the manual?
Questions and answers