Advertisement
Step 5
A ach the lower dash sec on back in. Run the
three harnesses through the hole that used to
house the parking brake. Bolt the sec on back in
place using the 2 bolts removed in step 1.
Step 6
Re-install both USB port and cigare e lighter on the top of new console, as shown
below in the le image.
Remove the faceplate located on the driver' side of the new console and a ach
the factory emergency brake switch to the back using the factory screws removed
in the previous step. Re-install the faceplate into side of console.
Step 7
Detach the Console Mid Moun ng Base from the
console by un-fastening the nuts located on inside,
retain the hardware.
901-0165B
7
Document Rev 1 December, 2019
Advertisement
