Advertisement
Installa on Instruc ons:
Step 1
Remove the Factory Floor Plate by removing the 2 bolts located under the dash, 2
inside the cutouts on top of the plate and bolts on the back side of the plate. Re-
tain the hardware for new consoles.
Before
Step 2
Remove the factory lower dash sec on by loosen-
ing the 2 screws loca on on either side using a
7mm socket.
901-0165B
A er
CAUTION: The lower dash
sec on has wiring harnesses
that are a ached.
5
Document Rev 1 December, 2019
Advertisement
