Checklist Before Usage - LG MD19GQGA1 Owner's Manual

CHECKLIST BEFORE USAGE

Dehumidification amount changes according to indoor temperature and
relative humidity.
- If the temperature or relative humidity is low, dehumidification amount is decreased.
- Dehumidification is performed with compressor operation only when the desired humidity is
lower than the current humidity.
The product can operate in the temperature boundary of 5°C~32°C.
- At 0°C or less, dehumidified water will freeze, and dehumidification cannot be performed.
- If it is over 32°C, the temperature inside the dehumidifier will rise, and there will be cases of
stopping the operation by protective device activation to avoid excessive usage.
When the dehumidifier is under operation, the indoor temperature will rise.
- Dehumidifier does not have a cooling/heating function.
- Heat is generated during the operation, so the temperature may be increased by about 2°C~3°C
according to the usage conditions (indoor temperature, size of the room).
Operation will restart after 3 minutes.
- If it is restarted right after the stop, the compressor will start about 3 minutes after to protect the
product.
It automatically protects the product during the continuous operation.
If it is operated for 24 hours or more continuously, the compressor will stop automatically to pro-
tect the product, and it will restart after 1 hour.
Please have gap of 30cm or more from the wall.
If it is not ventilated well, the air suction performance will be degraded.
There may be water remaining in the drain water tank at the first time
usage.
There may be water remaining in the drain water tank by the product outgoing inspection to check
the normal operation of the product. It is not a failure.
CHECKLIST BEFORE USAGE
9