Location Requirements - Haier ESAQ406T User & Care Manual

LOCATION REQUIREMENTS

IMPORTANT:
O s b r e
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models: ESAQ406T HWQ08XCT
NOTE: o D not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough window opening for the air conditioner. (See Fig.2)
• The air conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be
installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees,
etc. Air must be able to pass freely through the cabinet louvers. (See Fig.1)
Fig. 1
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements:
A. Width
B. Height
PAGE 6
e v all governing codes and ordinances. Check the location where the air
WIDTH
ESAQ406T
HWQ08XCT
26-1/16" - 39-1/4"
13-3/8"
INSTALLATION REQUIREMENTS
Fig. 2
AIR DISCHARGE
B-HEIGHT
WIDTH
A-WIDTH