Hitachi SK-HD1800 Operating Instructions Manual page 74

Function menu
8.4.7.1 FORMAT menu (MAINTENANCE SUB-MENU)
■ＦＯＲＭＡＴ ：＜
ＳＹＳＴＥＭ ＦＲＥＱ：５９．９４Ｈｚ
ＳＥＴ ＤＡＴＡ ：ＰＵＳＨ ＞
Note
Procedure for switching system frequency during system operation combined with CCU and RU
(Ex. Switching from 59.94Hz to 50Hz)
Target
ＦＯＲＭＡＴ ：＜
■ＳＹＳＴＥＭ ＦＲＥＱ：５９．９４Ｈｚ
ＳＥＴ ＤＡＴＡ ：ＰＵＳＨ ＞
CAMERA
ＦＯＲＭＡＴ ：＜
ＳＹＳＴＥＭ ＦＲＥＱ：５０Ｈｚ
■ＳＥＴ ＤＡＴＡ ：ＰＵＳＨ ＞
RU
ＣＵ－ＦＵＮＣＴＩＯＮ：＜＞
ＢＵＺＺＥＲ ：ＥＮＡＢＬＥ
ＳＤＩ ＡＵＤＩＯ ：ＯＦＦ
ＣＣＵ ＩＤ ： １
＊ＣＡＢＬＥ ＭＯＤＥ ：ＨＹＢＲＩＤ
ＰＡＲＡ ＭＯＤＥ ：ＯＦＦ
■ＳＹＳ ＦＯＲＭＡＴ ：＞１０８０ｐ
５９．９４Ｈｚ
ＴＩＭＥ／ＤＡＴＥ ：＞'１５．０１．０１
１２：００
CCU
ＳＹＳ ＦＯＲＭＡＴ ＜
□ ５９．９４Ｈｚ
■ ☑ ５０．００Ｈｚ
ＳＥＴ ＤＡＴＡ ：ＰＵＳＨ ＜＋＞
RU
Item
SYSTEM
FREQ
SET DATA
Menu Screens
Ｔｉｍｅ－ｏｕｔ： ９
Setting Initial
setting
59.94Hz or 50Hz are selectable.
－
59.94Hz After selection, move the cursor to the
50Hz line "SET DATA" and then press knob to
store the setting. (*)
Press the MENU SEL knob to activate the
－ －
SYSTEM FREQ setting
Operating procedure
(1) Open the FORMAT menu of camera via RU.
(2) Move the cursor to SYSTEM FREQ.
(3) Press button to change from 59.94Hz to 50Hz.
(4) Move the cursor to SET DATA.
(5) Press button for two seconds to establish system
frequency of camera.
(Menu screen will be disturbed inevitably due to frequency
collision between camera and CCU.)
(6) Turn off the camera power.
(7) Open the CU-FUNCTION menu of CCU via RU.
(8) Move the cursor to SYS FORMAT and press
(9) Move the cursor to 50.00Hz and press
(10) Within 10 seconds, move the cursor to SET DATA and
press both and
establish system frequency of CCU.
(11) Turn on the camera power.
60
Description
button.
button.
buttons simultaneously to