Table of Contents
Advertisement
White shading adjustment
6. Open the H SHADING or V SHADING sub menu, and then make flat the Gch waveform manually. .
Ｈ ＳＨＡＤＩＮＧ ：＜
ＬＥＮＳ ＦＩＬＥ ：ＬＥＮＳ １
ＥＸＴＥＮＤＥＲ ：ＯＦＦ（×１）
Ｒ Ｈ ＳＡＷ ： ０
■Ｇ Ｈ ＳＡＷ ： ０
Ｂ Ｈ ＳＡＷ ： ０
Ｒ Ｈ ＰＡＲＡ ： ０
Ｇ Ｈ ＰＡＲＡ ： ０
Ｂ Ｈ ＰＡＲＡ ： ０
ＩＮＩＴＩＡＬＩＺＥ ：
7. Move cursor to WHT SHADING : PUSH > 1 SEC line in the WHT SHADING sub menu.
ＷＨＴ ＳＨＡＤＩＮＧ：＜
ＬＥＮＳ ＦＩＬＥ ：ＬＥＮＳ １
ＥＸＴＥＮＤＥＲ ：ＯＦＦ（×１）
■ＷＨＴ ＳＨＡＤＩＮＧ：ＰＵＳＨ ＞ １ＳＥＣ
Ｈ ＳＨＡＤＩＮＧ ：＞
Ｖ ＳＨＡＳＩＮＧ ：＞
8. Press the MENU SELECT button for about 1 second to adjust white shading. The viewfinder top
and bottom cursors flash to indicate automatic white shading adjustment in progress. The cursors
extinguish at the end of adjustment.
9. Set the extender (if provided) to on and repeat the above step.
10. Close the Function menu.
White shading adjustment is completed by the above. The adjustment is stored in a nonvolatile memory
and ordinarily does not need to be repeated even if the power is switched off.
Notes
1. Precise adjustment may not be obtainable with some special lenses.
2. Even after adjustment, some coloration may occur near the open iris setting. This is due to
lens and optical system characteristics and is not a malfunction.
Ｖ ＳＨＡＤＩＮＧ ：＜
ＬＥＮＳ ＦＩＬＥ ：ＬＥＮＳ １
ＥＸＴＥＮＤＥＲ ：ＯＦＦ（×１）
Ｒ Ｈ ＳＡＷ ： ０
■Ｇ Ｈ ＳＡＷ ： ０
Ｂ Ｈ ＳＡＷ ： ０
Ｒ Ｈ ＰＡＲＡ ： ０
Ｇ Ｈ ＰＡＲＡ ： ０
Ｂ Ｈ ＰＡＲＡ ： ０
ＩＮＩＴＩＡＬＩＺＥ ：
cursors
15
Advertisement
Table of Contents
