Hitachi SK-HD1800 Operating Instructions Manual page 52

Function menu
The camera head is connected with a CCU and an RU as an operational camera system, the camera
head View finder display TOP MENU as follows. This is mainly used for camera man's operation.
ＴＯＰ ＭＥＮＵ
■ＶＦ ：＞
ＣＵＳＴＯＭ ＳＷ ：＞
ＳＥＴＵＰ ＣＡＲＤ ：＞
The camera head is connected with a CCU and an RU as an operational camera system, The CCU
output display TOP MENU on the PIX out monitor as follows. This is for Video operator at the CCU.
ＴＯＰ ＭＥＮＵ
■ＣＯＬＯＲ ：＞
ＤＥＴＡＩＬ ：＞
ＭＡＩＮＴＥＮＡＮＣＥ：＞
ＦＩＬＥ ：＞
ＳＥＴＵＰ ＣＡＲＤ ：＞
From the RU control unit, all function controls can give to the camera head and set the camera
function at head site which we call "CONTROL HEAD" and display in the Viewfinder as follows.
ＴＯＰ ＭＥＮＵ
■ＶＦ ：＞
ＣＯＬＯＲ ：＞
ＤＥＴＡＩＬ ：＞
ＭＡＩＮＴＥＮＡＮＣＥ：＞
ＦＩＬＥ ：＞
ＣＵＳＴＯＭ ＳＷ ：＞
ＳＥＴＵＰ ＣＡＲＤ ：＞＞
All above TOP MENU has following Main menu.
Item Main Menu
1 VF
2 COLOR
3 DETAIL
4 MAINTENANCE
5 FILE
6 CUSTOM SW
SETUP CARD
７
VF MENU
Open this menu by pushing the MENU SW in side of the
camera. Close for pushing this again.
PIX MENU
Open this menu by pushing the MENU SW in the RCU.
VF MENU
Change screen to VF main menu items display.
Change screen to COLOR main menu items display.
Change screen to DETAIL main menu items display.
Change screen to MAINTENANCE main menu items display.
Change screen to FILE main menu items display.
Change screen to CUSTOM SW main menu items display.
Change screen to SETUP CARD main menu items display.
38
Description