Initial start−up, inspection and maintenance
Further details regarding the individual steps
Checking all gas unions for leaks
Implementing final tests
18
(cont.)
1. Insert new gaskets in all fittings
which have been opened, and
tighten fittings.
2. Open the gas shut−off valve.
3. Check the inlet seals of the gas
combination valve for leaks.
4. Start up the burner (see page 5).
5. Check the outlet seals of the gas
combination valve for leaks.
1. Implement a final check in
accordance with the steps on
pages 11 to 13.
2. Record the actual values in the
service report (from page 42).