Table Of Contents - Viessmann Vitovent 300 Service Instructions For Contractors

Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
For further information regarding the individual steps, see the page indicated
•
• • •
•
•
•
•
•
• • •
•
•
•
• •
•
• • •
• • •
•
6
Commissioning steps
Inspection steps
Maintenance steps
1. Checking the domestic ventilation system..................
2. Starting the Vitovent.......................................................
3. Setting the language, time and date.............................
4. Setting the air flow rate for operating modes..............
5. Duct system (flat) metal: Pre-selecting the supply/
extract air apertures....................................................... 10
6. Duct system (flat) plastic: Pre-selecting the supply/
extract air apertures....................................................... 28
7. Adjusting the air flow rate.............................................. 34
8. Shutting down the system............................................. 36
9. Opening the appliance................................................... 37
10. Cleaning Vitovent, countercurrent heat exchanger
and filter mats (replacing if required)........................... 38
11. Cleaning the plastic duct system (flat)......................... 40
12. Checking the condensate drain.................................... 40
13. Installing a countercurrent heat exchanger and
closing the Vitovent........................................................ 40
14. Checking the firm seating of electrical plug-in
connections and cable entries
15. Closing the appliance and commissioning the system
16. Instructing the system user........................................... 40
Page
7
8
8
9