Advertisement
Volvo 1990 740 Model
Normally, polishing is not required during the first year after delivery, however, waxing may be
beneficial.
Before applying polish or wax the car must be washed and dried. Tar spots can be removed with
kerosene or tar remover. Difficult spots may require a fine rubbing compound.
After polishing use liquid or paste wax.
Several commercially-available products contain both polish and wax. Waxing alone does not substitute
for polishing of a dull surface.
A wide range of polymer-based car waxes can be purchased today.
The waxes are easy to use and produce a long-lasting, high-gloss finish that protects the bodywork
against oxidation, road dirt and fading.
Chromed parts
Chromium-plated and anodized parts should be washed with clean water as soon as they become dirty.
This is particularly important if you drive on gravel roads or on roads where salt is used during the
winter. After the car has been washed, apply wax or an anti-rust preparation.
Stains on chrome trim can be removed with commercially-available chrome cleaner. Do not use abrasive
compounds or steel wool.
pg. 94 Cleaning the upholstery
Cleaning the upholstery
Volvo recommends the use of Volvo approving cleaning products which are available at your authorized
Volvo dealer.
The fabric can be cleaned with soapy water or a detergent. For more difficult spots caused by oil, ice
cream, shoe polish, grease, etc.., use a clothing/clothing fabric stain remover.
The plastic in the upholstery can be washed with soapy water or a mild detergent.
Leather upholstery can be cleaned with a soft cloth and mild soap solution.
For more difficult spots, consult your Volvo dealer.
On no account must gasoline, naphtha or similar cleaning agents be used on the plastic or the leather
since these can cause damage.
Cleaning the seat belts
file:///K|/ownersdocs/1990/1990_740/90740_19.htm (9 of 10)12/30/2006 8:26:04 AM
Advertisement
