Setting The Rinse Aid Amount; End Of Program - Beko DVN05R20W User Manual

Setting the Rinse aid Amount

1. While the Program Selection Knob is
"Off", press and hold the Half Load/
Tablet function key of your machine
and rotate the Program Selection
Knob one step clockwise and keep the
function key pressed for 3 seconds.
Machine switches to rinse aid setting
mode.
2. When the rinse aid setting mode is
activated, the rinse aid level in the
memory is indicated by the program
monitoring LEDs for 5 seconds.
3. Bring the Program selection knob to
the proper position for the new rinse
aid amount setting.
4. Press the Start / Hold / Cancel key
once to record the selected setting in
the memory.
5. Machine returns to normal mode when
you bring the Program Selection knob
to "Off" position again.
1
2
5
3
4
Rinse Aid
program
Amount
selection knob
Applies 1
dose of rinse 1
.aid
Applies 2
dose of rinse 2
.aid
Applies 3
dose of rinse 3
.aid
Applies 4
dose of rinse 4
.aid
No dose of
rinse aid is
5
.applied
34/EN
Level of
Rinse Aid Setting Indicator
The washing
indicator on the panel
The drying indicator on
.the panel illuminates
The End indicator on
.the panel illuminates
The Washing, Drying
and End indicators on
.the panel illuminate
The Washing, Drying
and End indicators on
the panel flashes with
.intervals of 1 second

End of Program

Program End indicator illuminates when the
washing program has ended.
1. Turn off your machine with the On-Off /
Program Selection knob.
2. Turn off the tap.
3. Remove the plug from the outlet.
After washing your dishes, keep
them inside the machine for cooling for
approximately 15 minutes. Your dishes
shall dry faster if you leave the door of
your machine ajar within this period. This
shall improve the drying efficiency of the
machine.
.illuminates