Cleaning The Hose Filter - Beko DVN05R20W User Manual

4. Clean all three filters under tap water
by means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the micro
filter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a "click" sound is heard.
Do not use the dishwasher without
filter.
Incorrect placement of the filters will
reduce washing efficiency.
Micro Filter Cleaning Mechanism
(depends on model)
Filter cleanliness is increased by 80%
with the micro filter cleaning system
available on your machine.
If your machine has auto filter cleaning
feature do not remove the micro filter
cleaning mechanism (4) for cleaning.
36/EN

Cleaning the hose filter

Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it under
running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(depends on model)