Whirlpool DS201NB Operating Instructions Manual page 51

Problem
The dehumidifier is noisy
Water leakage
The humidity
shows on display
is different from
hygrometer
Power Cord or plug
generate abnormal heat
Possible Cause & Solution
• The sound is generated due to the air flow especially in HIGH fan speed.
The sound level varied with the environment but the efficiency is not
affected.
• Sound will be generated when starts up. It is due to the operation of
compressor. It is not a malfunction.
• The volume of sound is differs depending on the louver angle.
• Check if the dehumidifier is placed on a flat surface.
• Check if the rear panel is in proper position
• Check if the air inlet and outlet is blocked. If yes, remove the barrier and
make sure there is enough space for the dehumidifier [P.38]
• Check if the filter is dirty. Clean the filter [P.46]
• Check if the water tank is in proper position. Check if the dehumidifier
place in a flat surface.
• If under continuous drainage, check the hose inserted in the drainage
hole properly.
• Whether the water tank pull out the water empty, causing the machine
having the remaining water inside the machine.
• The display shows the humidity level at its current position , which may
be different from the level at other position.
• The humidity level shows by the product contains tolerance , which is
normal. And it should not be compared with the hygrometer directly.
• Try the plug into another plug socket to see whether still have the same
situation or not.
• Stop using the dehumidifier immediate and contact customer services for
help.
Trouble
shooting
49