Panasonic NA-128VG6 Operating & Installation Instructions Manual page 36

Moving and Installing
Removing the anchor bolts
The anchor bolts keep the interior of
the appliance in place, and protect it
from vibration during transportation.
1 Loosen the 4 anchor bolts (4
pieces) using a spanner.
2 Turn the rubber part of each bolt
counterclockwise and pull it out.
3 Attach the cover cap to the hole. If
the caps are not attached, foreign
objects may enter the appliance
and cause a malfunction.
NOTE
Operating the appliance with
anchor bolts still attached will cause
excessive vibration. They must be
removed before operation.
Store the anchor bolts. They will
be needed when the appliance is
moved again in the future.
36
Anchor
bolts
(Rear of appliance)
(continued)
When moving the appliance again,
the anchor bolts must be attached
to the appliance. Attach the anchor
bolts in the reverse order they were
removed.
Levelling the appliance
Prepare a thin spanner and spirit
level. (not supplied)
Use a spirit level to make sure the
appliance is level.
Spirit level
4 adjustable
feet
1 Loosen the lock nut with the
spanner.
2 Turn the adjustable foot to adjust
the height.
3 Tighten the lock nut.
NOTE
Make sure that all lock nuts
are tightened securely and the
adjustable feet are still bolted to the
appliance.
If they are unbolted, the appliance
will shake and move around.
Spirit level
3
1
2