Table of Contents
Advertisement
Pattern Setup
You can manually record your pan/tilt/zoom movements to a monitoring pattern for
up to 2 minutes.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
Select <mAIN mENU>-<AUTO SET>.
1.
2.
Select the pattern number.
PATTERN setup screen appears.
3.
Select the <POSITION> and set the
pattern's starting position and press
[ENTER].
Select the <START> and move the
4.
camera using pan/tilt/zoom.
5.
Your manual camera actions will be
recorded for up to 2 minutes, and returns
to the previous menu automatically.
To stop manual recording and return to the
previous menu before 2 minutes, press
[ENTER].
Scan Setup
You can set the SCAN operation to include a defined preset position.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1.
Select <mAIN mENU>-<AUTO SET>.
2.
Select the scan number.
SCAN setup screen appears.
3.
Move the cursor to a number with the []
mark which contains a defined preset.
4.
Press [ENTER].
[S] mark appears beside the [] and the
corresponding preset is included in the
scan.
M
SCAN numbers configured for a certain page can be saved only in the corresponding
page. Make sure to save it before moving to the next page.
PATTERN SET 1
<POSITION>
START
PATTERN SET 1
<POSITION>
START
SCAN 1
0
S
1
2
3
5
6
7
8
10
11
12
13
15
16
17
18
20
21
22
23
25
26
27
28
30
31
1/16
English _
4
9
14
19
24
29
Advertisement
Table of Contents
