Table of Contents
Advertisement
installation & connection
4.
Connect the "SAFETy WIRE" of the "CAmERA" to the "BRACKET WIRE" on the
"FRAmE SET". Arrange the "22P CONNECTOR" of the "CAmERA" in line with that
of the "ADAPTOR", push the "HOOK" on either end of the "CAmERA" in the "RACK"
direction of the "FRAmE SET" to secure the two.
Then, ensure that all of the two "HOOKS" "clicks" to fix to the "RACK" properly.
FRAME SET
22P CONNECTOR
FRAME SET
RACK
CAMERA
HOOK
M
When the installation is completed, remove the "PROTECTIVE FILM" and
"PROTECTIVE TAPE" from on the lens.
1_ installation & connection
CAMERA
HOOK
PROTECTIVE TAPE
BRACKET WIRE
SAFETY WIRE
FRAME SET
RACK
CAMERA
PROTECTIVE TAPE
PROTECTIVE FILM
Advertisement
Table of Contents
