Table of Contents
Advertisement
IRIS
The IRIS menu is useful if you set to adjust the
intensity of radiation incoming to the camera.
ALC : Adjust the open and close of the iris.
- LEVEL : Select an overall brightness level.
- BLC : With <BACKLIGHT> set to
<BLC>, you can specify the BLC area.
With AREA set to <USER>, you can
specify the position and size.
MANUAL : Adjust the iris level manually.
M
The overall brightness target of a camera
will be set to ALC level 0, while the iris
can be adjusted manually.
AGC
With this, you can adjust the AGC level of a
camera.
With AGC active, if the signal strength falls
below the standard level, AGC will amplify the
video signal to automatically improve the
sensitivity.
If <SENS-UP> is set to <OFF>, or <FIx>
mode, the <mOTION> menu will switch to
<AGC>.
With the USER (
) submenu selected, press
[ENTER] to display the corresponding screen.
In this mode, you can select from VERY LOW
to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience.
With the FIX (
) submenu selected, press [ENTER] to display the corresponding
screen. In this mode, you can select an individualized mode in 16 levels, regardless of
the brightness.
ALC
[ 00 ] ----I----
LEVEL
BACKLIGHT
AREA
<SIZE>
<LOCATION>
MANUAL
[ 00 ] ----I----
LEVEL
CAMERA SET
CAMERA ID
IRIS
AGC
(VERY HIGH) ---
DNR
SHUTTER
SENS-UP
FLICKERLESS
XDR
English _
BLC
USER
OFF
ALC
MID
OFF
OFF
OFF
MID
Advertisement
Table of Contents
