Preparing Interior Assembly - Honeywell 8812309S User Manual

PREPARING THE INTERIOR ASSEMBLY
5. UNPACK THE INTERIOR ASSEMBLY
a. Remove the battery cover by sliding the cover upward.
b. Locate the screws holding the Mounting Plate to the Interior Assembly. Remove the screws to release the
Mounting Plate from the Interior Assembly.
6. SET THE ENTRY SWITCH FOR LEFT OR RIGHT HANDED DOOR
a. Gently move the switch to "L" for Left Handed Door (Figure 6a).
b. Gently move the Switch to "R" for Right Handed Door (Figure 6b).
Entry Switch
(Left or Right)
Figure 6a-b
Figure 6a-b
7. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HAND HINGED DOORS
a. The Interior Knob goes in the Horizontal position for Left Handed Doors (Figure 7a).
b. The Interior Knob goes in the Vertical position for Right Handed Doors (Figure 7b).
Left Handed Door
(Horizontal)
Right Handed Door
(Vertical)
Figure 7a Figure 7b
NOTE: Make sure deadbolt Latch is retracted
5