Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not fit well. After reconnecting, turn off and on the
unit and the connected device.
• The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
• Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit's malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically
Try restarting the unit
Resetting the unit
(this resets the unit settings to the default)
Troubleshooting
Power
Audio
Listening Modes
Video
Linked operation
Contents
Connections
≫
Tuner
BLUETOOTH function
ZONE B function
Remote Controller
Display
Others
97
97
97
98
98
98
100
101
101
96
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
≫
≫
102
102
103
103
103
103