Recom RCM-4-TP-D User Manual page 20

2) According to the table above, select an appropriate copper cable, peel the insulation sleeve
of AC cable off for 50mm, and peel off the end of 3L /PE / N wires for 8mm, as shown in Figure
4-14:
3) Insert the stripped end of the five wires into the appropriate hole of the terminal head by
following the rules: yellow green wire to PE port, red or brown fire wires to L ports (no requests
for the sequence of three fire wires), and blue or black wire to the N port. Please try to pull out
the cable to make sure it's well connected. As shown in Figure 4-15:
4) According to the arrow direction to push the threaded sleeve to make it connected with the
AC terminal head and then rotate the cable gland clockwise to lock it. As shown in figure 4-16:
20
Wire Diameter:13-18mm
Figure 4-14
Figure 4-15
Figure 4-16
St r i p Len gt h: 8mm
50mm
A l l e n Ke y