Advertisement
Quick Links
Advertisement
Summary of Contents for FOS Technologies Haze 1200 Pro
- Page 1 FOS Haze 1200 Pro PRODUCT SPECIFICATIONS...
- Page 2 TECHNICAL SPECIFICATION Voltage: 220/240 Volt AC, 50/60 Hz. Power Consumption: 1200 Watt. Pre- Heating Time: 2,5 min. Fluid Consumption in maximum output: 8ml / min Haze Output: 4500 cuft /min. Tank: 5L Control: DMX512, On Board. DMX Channels: 2. Protection Class: IP20 (for indoor use only) Width: 223 mm Depth: 480 mm Height: 325 mm...
-
Page 3: Self-Cleaning Function
Self-cleaning function: After use, please don’t turn off the machine immediately. The machine has self-cleaning function, there has 3 different right operations: 1. If DMX512 is used, please turn the haze output to zero/turn off haze output, then still let the power on about 80-90 seconds. -
Page 4: Installation
IP54: complete protection against solids and low-pressure water from any side THIS TYPE OF FIXTURES CAN BE USED UNDER NORMAL OUTDOOR CONDITIONS. IP65: shielded against dust and pressurized water from any side. TYPICAL PROTECTION FOR OUTDOOR RATED EVENTFIXTURES USING WATERPROOFED POWER AND SIGNAL LINK. IP67: shielded against dust and protected for accidental briefly submerge. -
Page 5: Menu Screen
Menu Screen When you first turn on the Haze machine, you should wait for around 2 minutes while the unit warms up. When the warming up is completed, you will have access to various options if the wired remote control is not connected.