Page 1
started Scan for video instructions or visit limerickinc.com *click on support...
Page 2
What’s in the box? Pump assembly Container cap Cap insert Storage container Gasket Pump stand...
Page 3
Sanitize Put all of the parts—except the pump handle—into a large kitchen pot filled with water. Bring to a boil for between two and five minutes. Using a pair of tongs, pull out the parts and place them on a clean paper or cloth towel.
Page 4
The breast cup assembly & the pump body 1. Insert the silicone breast cup into the breast cup brace until the end of the breast cup extends out of the back of the brace. 2. Attach the breast cup and breast cup brace to the body of the pump as shown.
Page 5
Diaphragm Duck valve The duck valve & the diaphragm 1. Place the diaphragm in the top of the body of the pump, and press down along rim to create a tight seal. 2. Push the duck valve into the bottom end of the pump body.
Page 6
Attaching the handle The handle attaches to the body of the pump in two places. 1. Place the “U” shape under last notch on stem in diaphragm, and snap in place. 2. Turn the pump assembly upside down, snap handle onto “T”...
Page 7
Flat side Gasket Ridge side Storage container The storage container & the cap 1. Push gasket into the bottom of the body of the pump with ridge side facing down. Press firmly in place. 2. Screw storage container into the body of the pump. 3.
Page 8
Using your Love pump Center the nipple in the breast cup. Begin pumping by squeezing the handle halfway and rapidly, several times. Once the milk starts flowing, slow down your speed, and squeeze the handle fully or to your comfort level—...
Page 9
Wash after each use 1. Rinse with cool water to remove milk residue. 2. Wash all the parts in hot soapy water. Breast cups are dishwasher safe. However, we recommend washing by hand or using the steam sanitizing bags to avoid soap residue from the dishwasher. 3.
Need help?
Do you have a question about the Love and is the answer not in the manual?
Questions and answers