Control Panel - Cuisinart Thermal Coffee Center SS-20 Series Instruction Booklet

GETTING TO KNOW YOUR CONTROL PANEL
10-CUP COFFEEMAKER CONTROLS
Detailed programming and use instructions are on pages 8–10.
1. Power Switch (not shown)
Located on the right side of your brewer.
Use to turn your Coffeemaker on and off.
2. Clock Display
Displays time of day and Auto On times.
3. Clean Indicator
Indicates time to clean Coffeemaker
to remove calcium buildup.
4. Hour and Minute Buttons
Use to set hours and minutes for time
of day and Auto On times.
5. BOLD Cup Setting with Indicator
Use to select bolder coffee flavor strength.
6. BREW Button
"BREW" will be lit when unit is ready to brew.
The top half will flash slowly while brewing.
SINGLE-SERVE COFFEEMAKER CONTROLS
Detailed use instructions are on pages 11–14.
9. Brew Buttons
6 oz. button; 8 oz. button; 10 oz. button.
10. Add Water Indicator
Indicates the need to add water to brew.
3 4 2
7 6
7. Function Knob
a. PROG
Select to program Auto On time.
Coffeemaker can be programmed to
automatically start brewing up to 24 hours
in advance.
b. AUTO ON
Select to automatically start brewing coffee
at the time you've programmed.
c. BREW
Select to begin brew cycle when BREW
button is pressed.
d. CLOCK
Select to set time of day.
8. Ready Tone Knob
Set Ready Tone to ON for audible alert when
brew cycle is complete. Set to OFF for no
audible alert.
5
8 9
11. Clean Indicator
Indicates it is time to clean the Coffeemaker
to remove calcium buildup.
7
11
10